Digital Photography from 20,000 Feet
by Wesley Fink on September 25, 2006 12:05 AM EST- Posted in
- Digital Camera
F Stop: The Speed of the Lens
Most buyers today are used to the idea of zoom lenses, and they aren't even aware of how many compromises the common "kit" zoom lens forces on them. The biggest compromise by far is lens speed. Film SLR cameras normally came with a normal lens that was rated at an f-stop of f1.7-1.8, where most zoom lenses are rated at speeds like f3.5-f5.6. What is F-Stop, anyway?
F-stop is the focal length divided by the diameter of the lens. For example, a 200mm f/4 lens will be 50mm wide. 200mm/50mm = f/4. That is why f-stop is typically written as F/4, meaning "focal-length over 4" or "focal-length divided by four".
The aperture scale is like the ISO film speed scale in reverse. Each full F-Stop is half the light of the earlier number, and the LOWER the number the more light the lens can pass. Lenses are marked with a range of f-stops. The maximum light-gathering ability of a lens is determined by the lowest number or f-stop, and the rest of the range is adjustments to reduce amount of light the lens will pass. Look at the f-stop scale:
1 - 1.4 - 2 - 2.8 - 4 - 5.6 - 8 - 11 - 16 - 22 - 32
The progression of f-stops are powers of the square root of 2. This means each number, as it increases in full f-stops, will pass half the light of the previous smaller number.
Let's return to yesterday's typical normal lens at f1.7 and today's standard zoom at f3.5-f5.6. F1.7 to 1.8 is a half f-stop, which is 1.5 times faster than f2.0, and f3.5 is a half f-stop between 2.8 and 4.0. So, under the best circumstances, the f1.7 lens is capable of passing FOUR times the light of the zoom lens. This is under the best circumstances, however, since the f5.6 is the other end of a variable aperture. At the f5.6 end, the f1.7 can pass TWELVE times the amount of light of the f1.7. So if we have a zoom lens that is rated 18-55mm f3.5-5.6, it is capable of passing ¼ the light of the f1.7 at the 18mm side, and 1/12 the amount of light of the f1.7 at the 55mm end of the zoom range. In between the amount varies smoothly from 1/4 to 1/12.
Buyers who wonder why they have trouble taking sharp indoor photos with a standard zoom now have their answer. You will have to crank up the ISO, turn on anti-shake if it's an option, or use a flash to supplement light if you plan to take the typical family indoor photos with a standard zoom lens. Or you could buy a normal lens while there are still some on the market and attach a lens that was designed to shoot images in available light.
Depth of Field
Fast lenses are great, in that they allow you to shoot in lower light than a slower lens. However, there is a price to pay for this low-light capability. All things being equal the faster the lens the shallower the depth of field. What do we mean by depth of field?
Depth of field is the amount of distance between the nearest and farthest objects that appear in acceptably sharp focus in a photograph. A "good" depth-of field is pretty subjective, since a shallow depth of field might be preferred in a portrait of your girlfriend, but a wide depth of field is preferred in landscape shots. A few factors affect depth of field; they are:
1) the diaphragm opening of the lens (the aperture or f-stop),
2) the focal length of the lens in use, and
3) image size (which has a direct relationship to distance from the subject).
The general rule of thumb is the bigger the lens opening (aperture) used (the smaller the f-stop) the more shallow the depth of field.
This means that critical focusing will be required with a large f-stop because when you use a large aperture - in particular when attempting to focus at a nearby subject - the zone of sharpness (DOF) can be very limiting. On the other hand, if extended depth of field is desired, you can just choose a smaller lens opening (larger f-stop like f/8, f/11, f/16, f/22) to extend the plane of sharpness, so everything will be in sharper focus.
Depth of field also increases with distance. This means the farther you place the camera from your subject, the greater the depth of field. Landscapes have great depth of field, while macro (close-up) photographs tend to have very little depth of field because the subject is so close to the lens.
Most buyers today are used to the idea of zoom lenses, and they aren't even aware of how many compromises the common "kit" zoom lens forces on them. The biggest compromise by far is lens speed. Film SLR cameras normally came with a normal lens that was rated at an f-stop of f1.7-1.8, where most zoom lenses are rated at speeds like f3.5-f5.6. What is F-Stop, anyway?
F-stop is the focal length divided by the diameter of the lens. For example, a 200mm f/4 lens will be 50mm wide. 200mm/50mm = f/4. That is why f-stop is typically written as F/4, meaning "focal-length over 4" or "focal-length divided by four".
The aperture scale is like the ISO film speed scale in reverse. Each full F-Stop is half the light of the earlier number, and the LOWER the number the more light the lens can pass. Lenses are marked with a range of f-stops. The maximum light-gathering ability of a lens is determined by the lowest number or f-stop, and the rest of the range is adjustments to reduce amount of light the lens will pass. Look at the f-stop scale:
1 - 1.4 - 2 - 2.8 - 4 - 5.6 - 8 - 11 - 16 - 22 - 32
The progression of f-stops are powers of the square root of 2. This means each number, as it increases in full f-stops, will pass half the light of the previous smaller number.
Let's return to yesterday's typical normal lens at f1.7 and today's standard zoom at f3.5-f5.6. F1.7 to 1.8 is a half f-stop, which is 1.5 times faster than f2.0, and f3.5 is a half f-stop between 2.8 and 4.0. So, under the best circumstances, the f1.7 lens is capable of passing FOUR times the light of the zoom lens. This is under the best circumstances, however, since the f5.6 is the other end of a variable aperture. At the f5.6 end, the f1.7 can pass TWELVE times the amount of light of the f1.7. So if we have a zoom lens that is rated 18-55mm f3.5-5.6, it is capable of passing ¼ the light of the f1.7 at the 18mm side, and 1/12 the amount of light of the f1.7 at the 55mm end of the zoom range. In between the amount varies smoothly from 1/4 to 1/12.
Buyers who wonder why they have trouble taking sharp indoor photos with a standard zoom now have their answer. You will have to crank up the ISO, turn on anti-shake if it's an option, or use a flash to supplement light if you plan to take the typical family indoor photos with a standard zoom lens. Or you could buy a normal lens while there are still some on the market and attach a lens that was designed to shoot images in available light.
Depth of Field
Fast lenses are great, in that they allow you to shoot in lower light than a slower lens. However, there is a price to pay for this low-light capability. All things being equal the faster the lens the shallower the depth of field. What do we mean by depth of field?
Depth of field is the amount of distance between the nearest and farthest objects that appear in acceptably sharp focus in a photograph. A "good" depth-of field is pretty subjective, since a shallow depth of field might be preferred in a portrait of your girlfriend, but a wide depth of field is preferred in landscape shots. A few factors affect depth of field; they are:
1) the diaphragm opening of the lens (the aperture or f-stop),
2) the focal length of the lens in use, and
3) image size (which has a direct relationship to distance from the subject).
The general rule of thumb is the bigger the lens opening (aperture) used (the smaller the f-stop) the more shallow the depth of field.
This means that critical focusing will be required with a large f-stop because when you use a large aperture - in particular when attempting to focus at a nearby subject - the zone of sharpness (DOF) can be very limiting. On the other hand, if extended depth of field is desired, you can just choose a smaller lens opening (larger f-stop like f/8, f/11, f/16, f/22) to extend the plane of sharpness, so everything will be in sharper focus.
Depth of field also increases with distance. This means the farther you place the camera from your subject, the greater the depth of field. Landscapes have great depth of field, while macro (close-up) photographs tend to have very little depth of field because the subject is so close to the lens.
Facebook
Twitter
RSS
81 Comments
View All Comments
squiddy - Thursday, February 15, 2007 - link
I'm fairly versed in film and digital SLRs and have been shooting since the mid-80s. Nikon afficionado here but I did have a few Canon EOS film bodies back in the day. Currently use a D70s and soon hopefully a D200 in my bag.Anyway, as to sugestions for future reviews, the technical aspect tests are all well and good since numbers are always easy to quantify. The MP count, max resolution, test charts and etc do help people choose cameras after all. What I'd like to see more of are subjective reviews. How user-friendly is the camera? Are the menu's easy to navigate and the features easy to get to? How are the ergonomics and will my hand require a chiropractor after a long day of shooting? Is the camera balanced even when using a medium telephoto lens? How about accessories (flash kits, filters, battery grips, flash brackets, etc), are they useful for this camera or just gravy?
What made me write these additional questions is that I experienced it when I borrowed a Canon 350d for a friend's wedding. This was before my Nikon D70s and I absolutely loved/hated it. The pictures were great but required heavy menu navigation for white balance and iso settings. The camera was lighter than my old film Nikon so it wasn't tiring to carry all the time but the grip was awful. My pinky was sticking out under the body and a;; the weight was focused on the upper/rear quarter of my right palm. I'll tell you now, it hurts to use it for a long time. Especially with a 430ex flash. I then tried a friend's D50 and a D70 after that and it solidified my Nikon preference. Great ergonomics and the two dials give you much greater flexibility on the fly.
These reviews are probably aspects that the average consumer won't consider before purchasing and just focus on numbers but it greatly affects the usability of the camera in the long run.
Thanks guys and keep up the great work!
appu - Sunday, October 8, 2006 - link
I don't know if these have already been covered in the comments earlier. There are quite a few and I didn't read them all.1.) When talking about vibration reduction, you need to make sure you tell your readers that VR/IS *cannot* eliminate subject motion blur. It can only eliminate (to a degree) blur caused by handshake. I'm surprised you missed such an important point considering that you felt most AT readers are newbies at photography. It's all dandy to believe that VR gets you sharp images all the time. No, it doesn't. There are caveats and you might have mentioned them.
2.) The real benefit of SLR cameras is - more than anything else - the fact that the photographer sees what the lens sees. That's a major, major advantage of a SLR over point-and-shoots and rangefinders which exhibit parallax error by the nature of their design, especially if the subject is close to the lens/camera. Given this, you might have also mentioned that sensor-based stabilization techniques are a bit of a misfit (atleast that's what I tend to think) because having a stabilized sensor still *will not* give you a stabilized image in the viewfinder. However, lenses which have VR in-built *will* give you a stabilized image in your viewfinder - again going back to the "what you see is what you get" thing. Having stabilized sensors is good for the customers as they don't pay VR royalty on every lens they buy, but I don't see the point in seeing a shaky image in the viewfinder and somehow expecting something sharp (to what degree I may not know) in the final image. Maybe 99.9999% here (or anywhere) wouldn't agree with me on this point but I think it's worth a note.
3.) Not all kit lenses are dogs. The 18-70 DX I have for my Nikon D70 is a wonderfully sharp, contrasty lens (of course in available light situations) and after almost 2 years of shooting DSLRs I can safely admit that I've not "outgrown" this lens. It still manages to surprise me every once in a while and I don't see the need for an exotic f/2.8 zoom in this range as yet. Point I'm trying to make is - don't berate kit lenses. They are there for a reason, and as with any lens, there are certain advantages and certain disadvantages. As a photographer, it's important to understand what every bit of your equipment is good at and then maximize the technical potential of your images because of this understanding. Infact, building up on this point...
4.) I'll go so far as to say that, even with fixed focal length (prime) lenses, the so-called "sweet spot" in terms of image sharpness and contrast is usually achieved when the lens is stopped down by 1.5 to 2 stops from its maximum aperture. If you are always going to think in terms of how zoom lenses are "bad quality" compared to primes, I'd encourage you to start shooting 2 stops down on your primes (and thus lose all the speed advantage these primes offer). I think you get what I'm trying to say. Let's not get too hung up on trivialities like this because, and I repeat because, modern zooms, even the consumer zooms produce wonderful images in the hands of capable photographers. And then you have pro-grade zooms like the 70-200 f/2.8 VR from Nikon and Canon's 17-40 f/4L etc. Yes, they are costly, but so is a 300 f/2.8 VR Nikkor or a pro-grade ~100mm macro. The price differential is evident only when you start looking at wide-to-medium-tele or super-wide-to-normal fast zooms (28-70 f/2.8, 17-55 f/2.8) and even then the output from these lenses is well worth their cost and the walk-around convenience they present to photographers who prefer this range of focal lengths. So, not all zooms are "bad". Things have improved, just as they continuously do in the computer hardware business. Let's not get stuck in old notions based on old equipment manufactured using old processes.
Keep up the nice work!
appu - Sunday, October 8, 2006 - link
Ok, one last point -5.) In your second last page, you talk about "lens confusion" and how you'd like the industry to move to a standard naming of lenses. I don't understand what can be more standard than the focal length itself - a very physical property of a lens. A 35mm lens has a focal length of 35mm. Period. It doesn't depend on what format camera it's bolted on to. A 35mm lens is 35mm whether it's used on a 4x5 view camera or a 645 medium camera or a 35mm film camera or a digital equipped with an APS-C or.... you get the picture. In itself, the naming of the lens by its focal length (range, with zooms) is *not* confusing. What's confusing is what people make it out to be - quoting effective focal lengths for formats all and sundry, where as in reality, the measure everyone needs to be worried about is field-of-view. A 35mm lens will have different fields-of-view when used with different camera formats.
We don't need a standard for identifying lenses. We already have one - focal length (a physical property that doesn't change) and field-of-view (a very measurable metric). If anything, it's the "effective focal length" paradigm has to be done away with, IMHO.
appu - Sunday, October 8, 2006 - link
In the last line of the third from last paragraph - Nikon doesn't make a 11-18mm as far as I know. They do have a 12-24 f/4 DX and Sigma also has a 12-24 (I think a non-constant aperture) which can be used on full-frame cameras too, unlike the Nikon 12-24 DX. The 11-18mm is made by one (or both) of Tamron and Tokina I think.directed - Wednesday, September 27, 2006 - link
When reviewing DSLRs, I want to know how quickly they can autofocus in different lighting conditions. I want to know how good the autoexposure is in different situations. I want to know how the different flashes perform in different settings (not just the built in ones, but the ones you can buy for them). I want to know how accurate the color reproduction and contrast is. I want to know how good the jpg compression is (lets face it, few people will be using RAW). I want to know how long the batteries will last in different situations. I would also like there to be a comparison with other models in a similar price range as well as a comparison with the cheaper and more expensive models of the same manufacturer.Boy, looking at my post I sound demanding. LOL, I'm sure Anandtech is up to the challenge.
yyrkoon - Wednesday, November 1, 2006 - link
I dont know, I dont use AF for demanding lighting situations, I use the infinite Focus setting, and set the rest manually. That, and I think all 'prosumer' DSLRs have a fairly 'shitty' on cam flash, and alot of us would probably be more concerned with the hotshoe 'adapter'However, I will agree with battery life as an important factor, but to be honest I'm personally more concerned with how fast the camera is (FPS), and the media type used.
I see alot of stuff on dpreview.com like 'default <insert something relivent> setting is BAD' etc, but most of the these cameras can be manually adjusted away from default settings, so, IMHO, it's a moot point, and is pointless to really mention, learn how to use your camera ;)
You're not demanding, you just know what you want :)
yyrkoon - Wednesday, September 27, 2006 - link
Forget what all the nay sayers are saying guys, write you articles. I've been interrested in the Sony A100 for several months now, since the preview on dpreview.com. I also think you're right concerning the *mass* of information that dpreview gives off for thier camera reviews, most of it is un nessisary for all but the professionals, most of us just want to know things like, how many FPS does the camera achieve, how does it handle low light situations, how clean are the photos, etc.Carry on :)
silver - Wednesday, September 27, 2006 - link
Another good point. AT has always been about presenting good, practical information on the products that we use and in this context has always done a great job.The A100 certainly has my intrest as well but do note that most pro's do not need bells and whistles in their equipment. In fact most don't even want them available as it adds to both cost and complexity with almost no practical return in value.
Lord Midas - Wednesday, September 27, 2006 - link
Very good article Wesley. Thanks.Still a lot of this is still baffling at the moment but that should change when I get my Canon Rebel XTi 400D for Christmas.
What I would like to see in the reviews would also include the quality of the bundled lens (the Canon comes with the 18-55mm lens). As well as with a quality lens.
Will you also include reviews of lens:
For example you do the "Mid Range GPU Roundup - Summer 2006"
So you could do this with Normal, telephoto, etc lens.
So instead of reviewing one lens you can do a group test.
And I also think that a few standard photos for all the reviews would be good (indoor, outdoor, macro, etc) and a few random ones the the reviewer would think we would like.
Keep up the good work. Thanks.
mesonw - Tuesday, September 26, 2006 - link
Just wanted to add my 2p-worth. I feel I fit fairly well into the target audience you're aiming at. I'm very lacking when it comes to the technical details of cameras, digital or otherwise, yet I have a great desire to take good and interesting pictures.It's good for people to offer tips and ideas for your upcoming articles, but I don't see the point of the very knowledgeable and camera-savvy crowd out there making harsh criticisms simply because you're targetting people with less knowledge than them. Like they say, there are other sites to get in-depth information if they want it, so why berate AT for catering for others?
I for one look forward to your articles on the subject, because I know they will be well written, provide useful information and insights, and very likely make me a better amateur photographer.
Good work AT.